• Step 10. Refer to Day to Day Compost Worm Care guide
• Step 9. Working tray 3 is not required at this time
WORKING TRAY 3
• Step 8. Install lid and you’re ready to start worm farming
• Step 7. Install pre-soaked and gently wrung out worm farm blanket
• Step 6. Install damp newspaper layers as per step 2 directly to bottom of working tray 2
• Step 5. Refer to note below
INSTALL WORKING TRAY 2
Note: Overfill working tray 1 by approx 20mm so working tray 2 is resting hard on working tray 1 bedding and worms
• Step 4. Add your box of worms – spread evenly
• Step 3. Squeezing out excess moisture add combined and pre-soaked shredded cardboard and coco coir peat bedding materials – spread evenly
• Step 2. Neatly install a damp newspaper layer x3 sheets thick bringing up the sides approx 50mm
INSTALL WORKING TRAY 1
• Step 1. Leave tap in the open position with a weighted container underneath so to monitor liquid leachate run-off
1. We recommend you 1st read Bellarine Worms A Beginners Guide to Worm Farming as a general introduction.
2. Once you have decided what worm farm design suits your needs best, assemble and refer to the BW Set-Up Guide above working from the bottom up as illustrated.
| Text or Call | 0412 200 049 |
| Shop Address | 75 Bellarine Hwy Point Lonsdale Vic |
| Farm Address | 1552 Queenscliff-Portarlington Rd, Point Lonsdale VIC 3225 |
Bellarine Soil Tech © 2025 All rights reserved
